Official Luthiers Forum!

Hi folks,

Can anyone with the StewMac bender tell me the diameter of the bending form alignment rod? I’m making slats for some of my own shapes and want to add the notch in the pattern for future use with the StewMac bender.

It would also be good to know the height of the slot they are cutting in the pattern if longer than just the diameter of the rod.




Thanks!
Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars